Masking tape A few tips

When spraying operations, the most important thing is to ensure the tangential position of the construction, at this time, the paper tape is ready. But, for example, if you don't know how to properly apply and remove tape, problems can still ensue. Don't worry, GAEA is here to give you 5 masking tape tips that will transform your job.

First, keep the surface clean

Remove dust and dirt from edges and surfaces before applying to ensure perfect adhesion and clear edges. Fiber cloths can be used, but if you use a wet cloth, make sure the surface has dried before you start applying.

Please use short strips when applying tape

They are easier to apply and don't tangle. Short strips, while troublesome at first, make it easier to apply tape and get clear lines when drawing irregular surfaces and edges.

After pasting, be sure to press the seal edge back and forth with your fingers

Check the marking tape for bubbles and raised edges, as coatings such as paint may seep into them.

Brush a little paint the same color as the surface along the edge of the tape

To create an additional seal that prevents paint from seeping under the tape. It also guarantees higher precision when coating the surface of the masking tape.

Pull the tape slowly at a 45 degree Angle

Finally, when the paint is dry to the touch, slowly pull the tape at a 45 degree Angle. Please be gentle to avoid damage to paint and breakage of masking tape.